MultiPlus-II 48/6K5/100-50
Auswahl
Technische Daten
| Produktlinie | MultiPlus-II GX |
|---|---|
| Batteriespannung | 48 V |
| Wechselrichter-Nennleistung | 6500 VA |
| Max. Batterieladestrom | 100 A |
| Transferschalter | 50 A |
| AC-Ausgangsspannung | 230 V |
| AC-Ausgangsfrequenz | 50/60 Hz |
| Schnittstelle | VE.Bus |
| GX (Venus OS) | integriert |
| Datenblatt | https://www.victronenergy.de/upload/documents/Datasheet-MultiPlus-II-inverter-charger-4k-4k5-6k5-DE.pdf |
Beschreibung
NEW!
MultiPlus-II 48/6K5/100-50 GX
A MultiPlus, plus ESS (Energy Storage System) function
The MultiPlus-II is a multifunctional inverter/charger with all the functions of the MultiPlus and an additional function, namely that of an external current sensor. This extends the PowerControl and PowerAssist functions to 50 A and 100 A respectively. The MultiPlus-Il is ideally suited for professional seafaring, yachts, vehicles and land-based, off-grid applications. It also has an integrated function to protect against islanding. Several different system configurations are possible. Further information can be found in the ESS Design & Configuration manual.
PowerControl and PowerAssist - increasing grid or generator power
A maximum grid or generator current can be set. The MultiPlus-Il then takes other AC loads into account and only uses the current that is still "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function).
The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-Il immediately compensates for insufficient generator, shore power or mains power with energy from the battery. If the load is reduced, the "surplus" energy can be used to charge the batteries.
Solar power: alternating current even in the event of a grid failure
The MultiPlus-Il can be used with both non-grid-connected and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.
Two AC outputs
The main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator current, the MultiPlus-Il takes over the supply to the connected loads. Switching takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed.
The second output only supplies power if alternating current is available at the input of the MultiPlus-Il. Loads that must not discharge the battery, such as a water heater, can be connected to this output. The loads connected to the second output are taken into account by the PowerControl and PowerAssist function.
Virtually unlimited power thanks to parallel and three-phase operation
Up to six multis can be connected in parallel if there is a high power requirement. In addition to the parallel connection, three units of the same model can also be configured for a three-phase output. But that's not all: up to 6 sets of three devices can be connected in parallel
On-site system configuration, monitoring and control
Settings can be changed in minutes using the VEConfigure software (requires a computer or laptop and an MK3 USB interface). Several monitoring and control options are available: Ekrano GX, Cerbo GX, Venus GX, laptop, computer, Bluetooth (with optional VE.Bus Smart Dongle), battery monitor, Digital Multi Control.
Remote configuration and monitoring
Install a Cerbo GX or other GX products to connect to the internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed.
FAQ
Kundenbewertungen
Victron MultiPlus-II 48/6K5/100-50 GX: The all-in-one control center for maximum performance
Are you planning an energy system that doesn't compromise on performance? Do you want to supply your home, workshop or motorhome with superior power, but at the same time a clean, compact and maximally integrated solution?
The Victron MultiPlus-II 48/6k5/100-50 GX from Victron Energy is the answer. It is the logical further development of the GX series for anyone who needs more power. Victron has combined the proven power of the 6 kVa kVA MultiPlus-II with the complete intelligence of a GX control unit.
The result is an uncompromising all-in-one powerhouse - the perfect heart and brain for power-intensive off-grid systems, demanding homes and commercial applications where reliability is paramount.
The track record: Why the 6k5 GX is in a league of its own
- Superior 6 kVa kVA power: With 5,700 watts of continuous power and 11,000 watts of peak power, it effortlessly supplies even the most demanding loads such as heat pumps, air conditioning systems or larger machine tools.
- Complete GX control integrated: The brain of your system is already on board. You save the cost and space of a separate Cerbo GX without sacrificing full connectivity and control.
- Massive 100A battery charger: Recharge your battery banks extremely quickly from the mains or a generator. Ideal for systems where fast availability is essential.
- Maximum simplicity: Inverter, charger, transfer switch and controller in one housing. This significantly reduces complexity, cabling and installation costs.
- Globally networked: Connect the MultiPlus-II GX to the internet and get immediate full access to your system via the free Victron VRM portal - anytime, anywhere.
More than just an inverter: The 4 core competencies of the MultiPlus-II 48/6K5/100-50 GX
The MultiPlus-II 6k5 GX is not just a device that converts electricity. It is the multifunctional heart of your energy supply, a 4-in-1 powerhouse that responds intelligently to every situation. Let's take a closer look at the key features that make it so superior:
- The superior inverter: with a continuous output of 5700 watts, it converts the 48V direct current from your battery into a stable and clean 230V alternating current. That's enough power to reliably operate even energy-hungry consumers such as a heat pump, air conditioning system or large tools.
- The ultra-fast battery charger: With a massive charging current of up to 100 amps, it refills your battery banks from the mains or a generator in record time. This capability is crucial if you rely on a generator and want to minimize its runtime.
- The seamless transfer switch (UPS): If the public power fails, the MultiPlus-II reacts in less than 20 milliseconds and switches to battery operation. Your computers, servers and other sensitive electronics continue to run without interruption. You experience a blackout without even noticing it.
- The intelligent PowerAssist: Is your shore power connection at the harbor or campsite too weak? Is your generator too small for the starting peak of your air conditioning system? No problem. The PowerAssist mode intelligently draws power from the battery to absorb the peak load, preventing the fuse from tripping.
This intelligent interaction makes the MultiPlus-II 48/6K5/100-50 GX the ultimate control center for any demanding energy system.
The GX factor: intelligence and performance perfectly combined
The decisive advantage of the GX series is its seamless integration. Instead of buying, installing and wiring multiple devices, you get one perfectly coordinated unit.
What the integrated "GX" means for your project:
- Direct communication with your battery: The MultiPlus-II GX communicates directly with modern lithium batteries via the BMS Can port. This is the basis for safe, efficient and long-lasting operation of your valuable storage system.
- Full connectivity: With LAN, WLAN, USB and VE.Direct connections, the MultiPlus-II GX becomes a central data hub. It integrates solar charge controllers, tank sensors and other components into an intelligent overall system.
- A clear cost advantage: you save yourself the purchase of an external control unit. This makes getting started with a professional, remotely monitored Victron system significantly cheaper.
- Maximum ease of installation: Fewer devices mean less cabling, fewer potential sources of error and significantly faster commissioning. Everything you need is in one box - for a clean and reliable installation.
Technical deep dive: The specifications at a glance
| Merkmal | Victron MultiPlus-II 48/6K5/100-50 GX |
|---|---|
| Max. Wirkleistung (PEmax) | 4,54 kW (VDE-zertifiziert) |
| Architektur | All-in-One (Wechselrichter/Lader + GX-Steuerung) |
| Dauerleistung @ 25°C | 5.700 W (Batteriebetrieb) |
| Spitzenleistung | 11.000 W |
| Max. Batterieladestrom | 100 A |
| Transferschalter | 50 A |
| Integrierte GX-Funktion | Ja (inkl. Display, WiFi, BMS-Can) |
| Ideal für... | Leistungsintensive 1-Phasen-Systeme & 3-Phasen-Master |
The expert tip: Scalable 3-phase power, cleverly implemented
Do you want to supply an entire house or business with 3-phase power? This is where the 6k5 GX unfolds its full potential as the brain of a powerful network:
- The master (1x): A MultiPlus-II 48/6k5 GX (this device) acts as an intelligent control center.
- The slaves (2x): Two standard MultiPlus-II 48/6k5 (without GX) provide the pure power for the other two phases and are controlled by the master.
The result: A highly intelligent 3-phase system with almost 20 kVA power, realized with an unbeatable price-performance ratio. This is smart system design that pays off.
The MultiPlus-II 48/6K5/100-50 GX: The cornerstone for your project
This all-in-one power package is more than just a component - it is the foundation stone for a robust and intelligent energy system. The right planning ensures that this foundation can support an entire house.
At Verkauf-Bochum.de, we specialize in developing tailor-made solutions from excellent hardware such as the MultiPlus-II 48/6K5/100-50 GX. Whether you are looking for a quick, uncomplicated basis for your project or need in-depth technical advice - we are at your side as an experienced partner.
FAQ about the MultiPlus-II 48/6K5/100-50 GX
What is the main difference to the smaller 4k5 GX model?
Especially the power reserves. The 6k5 GX offers a higher continuous output in battery mode (5,700 W vs. 4,000 W) and a significantly more powerful battery charger (100 A vs. 55 A). At 4.54 kW, the 6k5 is also higher than the 4k5 model (4.00 kW) in terms of official grid feed-in (active power according to VDE). It is the right choice for systems with a high energy demand and large battery capacities that need to be charged quickly.
Do I still need a separate Cerbo GX for this device?
No. The MultiPlus-II 6k5 GX already has the complete functionality of a control unit integrated. You save the cost, space and installation effort of an external Cerbo GX.
Which batteries are ideal for the 6k5 GX?
Is the device approved for operation on the German power grid (ESS)?
Yes, without restrictions! The MultiPlus-II 48/6k5/100-50 GX is officially certified in accordance with VDE-AR-N 4105:2018-11 (unit certificate and NA protection are available). This means that the device is approved for legal connection and parallel operation on the public power grid in Germany. Your electrician can easily register the system with the grid operator using the official certificates.
Read more about the ESS system here.
