Skip to content
Set INDUSTRIE 3 phases 491KW battery 180 kva Quattro-II

Set INDUSTRIE 3 phases 491KW battery 180 kva Quattro-II

SKU SET180KW491KVA819775
by Victron Energy
Black Friday Deal --.--.--
194.113,87€
incl. 19% Taxes

Auswahl
4 - 6 Weeks

Notify me when back in stock

Payment methods:
  • American Express
  • Apple Pay
  • Bancontact
  • EPS
  • Google Pay
  • Maestro
  • Mastercard
  • MobilePay
  • PayPal
  • Union Pay
  • USDC
  • Visa
Quattro 48/15000/200-100/100 12x
pre-assembled cables, each 3m long, crimp cable lug M8 to crimp cable lug M8.
 48x
ABB fuse switch-disconnector type XLP2-2P
 12x
Ve.Bus cable 3m 11x
Ve.Bus cable 7,5m 1x
Ve.Bus cable 5m 12x
Mersen NH fuse-link SF size 2 gG 24x
Ekrano GX 1x
Interface MK3-USB 1x
Three-phase meter ABB B24 352-100 Silver RS-485 1x
CT PRO XT 400 SELV measuring current transformer 3x
RS485 to USB interface cable 5m 1x
Anti-islanding relay Central NA protection 1x
E-BOX-48100R-C LiFePo4 Battery Pack 96x
Battery cable set 2x2Meter 25mm² for Pylontech 48x
MEGA-fuse 125A/80V 48x
Fuse holder for MEGA-fuse with blue cover 48x
LV Communication Hub for E-BOX-48100R 1x
VE.Can to E-BOX-48100R LiFePo4 Battery Pack 1x
R-Bracket (battery housing for up to 8x E-Box-48100R) 12x
Advice/service and support 1x
Adjustment of charging components to lithium battery characteristic curve 1x
Software-based DC commissioning without on-site installation 1x


  • ⚠ Important safety note: Installation by trained specialist personnel only! ⚠

    • The system must be installed on site by a certified specialist company.
    • Improper installation can lead to life-threatening voltages, fires or system failures. Please have the installation carried out by certified specialists only!
    • The Ziehl relay is a safety-critical component of the central NA protection system. Suitable contactors and terminals must be selected and procured by the customer in accordance with the AC load capacity.
    • Not included in the scope of delivery:
      • DC busbars with a permanent load capacity of at least 4000A
      • all AC components
    • The system generates waste heat, the exhibition room must have adequate ventilation or cooling, otherwise there is a risk of shutdown and damage due to overheating.
    • The batteries weigh approx. 5 tons! The load-bearing capacity of the floor must be checked before installation.
    • The Victron and Pytes battery storage system may only be commissioned by a qualified installation company (AC & DC).
    • During commissioning, the 48VDC busbars must be pre-charged. Improper commissioning can lead to serious damage or dangerous situations.
    • The system must be load-free on the AC side during the entire commissioning process.
    • Observe the switch-on procedure:
      • The Quattros must not be connected to the DC mains at the same time.
      • They must be connected one after the other at intervals of at least 30 seconds via the respective fuses.
      • Failure to observe this sequence can lead to high inrush currents, damage to the system or failures.
      • IMPORTANT: Failure to comply with the switch-on procedure and all installation instructions specified here will invalidate both the manufacturer's warranty and the statutory warranty.
    • The concept must be checked and approved before ordering. Without prior inspection and approval, only the hardware will be supplied - no technical support!